| 序号 |
成果类别 |
成果名称 |
作者 |
期刊（出版社）名称 |
收录类别 |
SCI 分区 |
期刊影响因子 |
| 1 |
论文 |
A novel framework for deriving the unified SCF in multi-planar overlapped tubular joints |
张健 |
MARINE STRUCTURES |
SCI |
1区 |
2.491 |
| 2 |
论文 |
Mechanisms underlying the shape effect on nano-piezoelectricity |
唐淳 |
Nano Energy |
SCI |
1区 |
13.12 |
| 3 |
论文 |
In situ TEM observation of rebonding on fractured silicon carbide |
唐淳 |
Nanoscale(封面论文) |
SCI |
1区 |
7.233 |
| 4 |
论文 |
Mechanical Responses of a-axis GaN nanowires Under Axial Loads |
唐淳 |
Nanotechnology |
SCI |
2区 |
3.4 |
| 5 |
论文 |
Experimental study on the torsion behavior of a 3D 4-directionally braided composite shaft using DIC and AE |
骆英 |
Polymer Testing, |
SCI |
2区 |
2.247 |
| 6 |
论文 |
Preparation and characterization of 3D printed continuous carbon fiber reinforced thermosetting composites |
郝文峰 |
POLYMER TESTING |
SCI |
2区 |
2.247 |
| 7 |
论文 |
Investigation on interfacial fracture toughness of plasma-sprayed TBCs using a three-point bending method |
朱建国 |
SURFACE & COATINGS TECHNOLOGY |
SCI |
3区 |
2.906 |
| 8 |
论文 |
Dynamic caustics in unidirectional fiber-reinforced composites with mode I cracks: Experiment and numerical simulation |
郝文峰 |
MECHANICS OF ADVANCED MATERIALS AND STRUCTURES |
SCI |
3区 |
2.645 |
| 9 |
论文 |
Effect of welding and heat treatment on strength of high-strength steel columns |
张健 |
Journal of Constructional Steel Research |
SCI |
3区 |
2.509 |
| 10 |
论文 |
EXPERIMENTAL STUDIES ON THE ELASTIC PROPERTIES OF CARBON FIBER REINFORCED POLYMER COMPOSITES PREFABRICATED OF UNI- DIRECTIONAL CARBON FIBER FABRICS AND A MODIFIED RULE OF MIX-TURES IN THE PARALLEL DIRECTION |
骆英 |
ADVANCED COMPOSITES LETTERS |
SCI |
4区 |
0.422 |
| 11 |
论文 |
Numerical study on the tensile behavior of 3D four directional cylindrical braided composite shafts |
骆英 |
APPLIED COMPOSITE MATERIALS |
SCI |
4区 |
1.333 |
| 12 |
论文 |
Computational Analysis of Torsional Bulking Behavior of 3D 4-Directional Braided Composites Shafts |
郝文峰、朱建国 |
APPLIED COMPOSITE MATERIALS |
SCI |
4区 |
1.333 |
| 13 |
论文 |
A Unit-Cell Model for Predicting the Elastic Constants of 3D Four Directional Cylindrical Braided Composite Shafts |
郝文峰 |
APPLIED COMPOSITE MATERIALS |
SCI |
4区 |
1.333 |
| 14 |
论文 |
3D Finite Element Simulation of Shot Peening Using A Sequential Model with Multiple-Shot Impacts |
朱建国、张健 |
International Journal of Computational Methods |
SCI |
4区 |
1.036 |
| 15 |
论文 |
Designing Superhard Metals: the Case of Low Borides |
唐淳 |
AIP Advances |
SCI |
4区 |
1.653 |
| 16 |
论文 |
Interfacial toughness evaluation of thermal barrier coatings by bending test |
朱建国 |
Theoretical and Applied Mechanics Letters |
ESCI |
|
|
| 17 |
论文 |
嵌贴CFRP增强混凝土T型深梁抗剪性能的试验研究 |
骆英 |
建筑科学 |
核心 |
|
|
| 18 |
论文 |
去除Lamb波频散的线性映射法 |
骆英 |
实验力学 |
核心 |
|
|
| 19 |
论文 |
Lamb波稀疏阵列CFRP层合板损伤成像检测 |
骆英 |
固体力学学报 |
核心 |
|
|
| 20 |
论文 |
基于频率调谐和相控阵的金属板损伤检测 |
骆英 |
压电与声光 |
核心 |
|
|
| 21 |
论文 |
基于多级CIC滤波器的相控阵延时算法设计 |
骆英 |
信息技术 |
核心 |
|
|
| 22 |
论文 |
微尺度散斑制备方法研究及应用进展评价 |
朱建国 |
实验力学 |
核心 |
|
|
