学习经历：
2012.09-2018.12 南京工业大学 机械与动力工程学院 化工过程机械 博士
2008.09-2012.06 南京工业大学 机械与动力工程学院 过程装备与控制工程 学士
工作经历：
2019.03-至今 江苏大学 887700线路检测中心-欢迎您 讲师

1. 上海有色金属工业技术监测中心有限公司委托科研项目：新型镍基高温合金研发及蠕变寿命评估技术，2023.06-2023.12，主持/在研

2. 国合品控（上海）检测科技有限公司委托科研项目：直流有刷电机轴承测试用复合材料研发，2023.06-2023.12，主持/在研

3. 国家自然科学基金青年基金项目：激光选区熔化3D打印航空Ti2AlNb基合金及缺口件疲劳设计(52105149)，2022.01-2024.12，主持/在研

4. 中国博士后基金面上项目：基于光学测量的激光增材制造航空TC4ELI合金疲劳裂纹扩展行为及寿命预测(2020M681496)，2020.11-2022.12，主持/在研

结题项目

1. 哈尔滨工业大学（深圳）委托科研项目：固体氧化物燃料电池喷涂及分析，2020.12-2021.05，参与/已结题

2. 北京理工大学委托科研项目：锂电池热失控极片SEM表征，2020.06-2022.05，参与/已结题

3. 中国航发北京航空材料研究院委托科研项目：Ti2AlNb整体机匣材料元件/模拟件设计与试验技术研究，2020.06-2021.06，参与/已结题

4. 江苏大学高端装备关键结构健康管理国际联合研究中心开放课题：基于阵列磁声导波与阻抗的CFRP结构健康监测方法研究(KFJJ20-02K)，2019.09-2021.06，参与/已结题

5. 国家自然科学基金项目：工业纯钛室温蠕变及其含裂纹承压结构完整性评定(51475223)，2015.01-2018.09，参加/已结题

6. 国家自然科学基金项目：基于HILL屈服准则的正交各向异性金属承压结构分析设计方法(51675260)，2015.01-2018.09，参加/已结题

7. 江苏省研究生科研创新项目：工业纯钛室温蠕变疲劳裂纹扩展行为(KYLX15_0801)，2015.06-2018.09，主持/已结题

论文

[1] Jian Li*, Chang-Yu Zhou, Jian-Guo Zhu*, Xiao-Yu Wang. Creep analyses for pipe bends under combined internal pressure and bending loads. International Journal of Pressure Vessels and Piping 2021; 193: 104450.

[2] Wen-Jie Qian, Hui-Ying Zhang, Jian-Guo Zhu*, Jian Li*, Jian Zhang, Mu-Yu Zhang. Determination of fracture toughness of polymer coating using micro-scale digital image correlation technique. Polymer Testing 2021; 93: 106896.

[3] Jian Li*, Chang-Yu Zhou, Jian-Guo Zhu*. Limit loads for 180° pipe bends under in-plane bending moment considering geometric nonlinearity. International Journal of Pressure Vessels and Piping 2020; 183: 104100.

[4] Wen-Jie Qian, Jian Li, Jian-Guo Zhu*, Wen-Feng Hao*, Lei Chen. Distortion correction of a microscopy lens system for deformation measurements based on speckle pattern and grating, Optics and Laser in Engineering 2020; 124: 105804.

[5] Jian Li, Chuan-Yi Su, Lei Lu, Peng Zhang, Le Chang, Xin-Ting Miao, Bin-Bin Zhou, Xiao-Hua He, Chang-Yu Zhou*. Investigation on fatigue crack growth behavior for commercial pure titanium at different crack tip plastic deformed levels. Theoretical and Applied Fracture Mechanics 2019; 100: 1-13.

[6] Jian Li, Peng Zhang, Lei Lu, Fei Lv, Xin-Ting Miao, Le Chang, Bin-Bin Zhou, Xiao-Hua He, Chang-Yu Zhou*. Effect of pre-strain on fatigue crack growth behavior for commercial pure titanium at ambient temperature. International Journal of Fatigue 2018; 117: 27-38.

[7] Jian Li, Lei Lu, Peng Zhang, Xin-Ting Miao, Le Chang, Bin-Bin Zhou, Yuan-Zhe Wang, Xiao-Hua He, Chang-Yu Zhou*. Effect of cold creep on fatigue crack growth behavior for commercial pure titanium. Theoretical and Applied Fracture Mechanics 2018; 97: 177-188.

[8] Jian Li, Chang-Yu Zhou*, Le Chang, Xin-Ting Miao, Xiao-Hua He. Limit loads for un-cracked and circumferential through-wall cracked pipe bends under torsion moment considering geometric nonlinearity. Thin-Walled Structures 2017; 116: 37-52.

[9] Jian Li, Chang-Yu Zhou*, Xin-Ting Miao, Le Chang, Xiao-Hua He. Plastic limit loads for pipe bends with circumferential through-wall crack under torsion moment. International Journal of Mechanical Sciences 2015; 100: 283-297.

[10] Jian Li, Chang-Yu Zhou*, Peng Cui, Xiao-Hua He. Plastic limit loads for pipe bends under combined bending and torsion moment. International Journal of Mechanical Sciences 2015; 92: 133-145.

[11] Jian Li, Chang-Yu Zhou*, Ji-Lin Xue, Xiao-Hua He. Limit loads for pipe bends under combined pressure and out-of-plane bending moment based on finite element analysis. International Journal of Mechanical Sciences 2014; 88: 100-109.

[12] Le Chang, Bin-Bin Zhou, Tian-Hao Ma, Jian Li, Xiao-Hua He, Chang-Yu Zhou*. Comparisons of low cycle fatigue behavior of CP-Ti under stress and strain-controlled modes in transverse direction. Materials Science and Engineering A 2019, 746: 27-40.

[13] Le Chang, Bin-Bin Zhou, Tian-Hao Ma, Jian Li, Xiao-Hua He, Chang-Yu Zhou*. The difference in low cycle fatigue behavior of CP-Ti under fully reversed strain and stress controlled modes along rolling direction. Materials Science and Engineering A 2019, 742: 211-223.

[14] Le Chang, Chang-Yu Zhou*, Hong-Xi Liu, Jian Li, Xiao-Hua He. Orientation and strain rate dependent tensile behavior of single crystal titanium nanowires by molecular dynamics simulation. Journal of Materials Science & Technology 2018; 34(5): 864-877.

[15] Xin-Ting Miao, Qin Yu, Chang-Yu Zhou*, Jian Li, Yuan-Zhe Wang, Xiao-Hua He. Experimental and numerical investigation on fracture behavior of I-II mixed mode crack for commercially pure Titanium. Theoretical and Applied Fracture Mechanics 2018; 96: 202-215.

[16] Xin-Ting Miao, Qin Yu, Chang-Yu Zhou*, Jian Li, Yuan-Zhe Wang, Xiao-Hua He. Experimental and numerical investigation on fracture behavior of CTS specimen under I-II mixed mode loading. European Journal of Mechanics/A Solids 2018; 72: 235-244.

[17] Shun-Jie Li, Chang-Yu Zhou*, Jian Li, Xiang-Ming Pan, Xiao-Hua He. Effect of bend angle on plastic limit loads of pipe bends under different load conditions. International Journal of Mechanical Sciences 2017; 131-132: 572-585.

1. 2019年9月，中国杭州，参加2019年中国力学大会，做中文报告.
2. 2018年11月，中国南京，参加2018年国际结构完整性会议 (2018 International Symposium on Structural Integrity-ISSI2018)，做英文报告.
3. 2017年5月，英国曼彻斯特，参加第14届工程结构完整性评估暨2017国际结构完整性会议(Engineering Structural Integrity Assessment-ESIA14, in conjunction with the 2017 International Symposium on Structural Integrity-ISSI2017)，做英文报告.
4. 2016年7月，加拿大温哥华，参加2016年美国机械工程师协会举办的国际压力容器与管道会议(The 2016 ASME Pressure Vessels and Piping Conference)，做英文报告.
5. 2015年9月，中国上海，参加第14届国际压力容器技术会议(The 14th International Conference on Pressure Vessel and Technology)，做英文报告.